EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA
Product #:
EZ3005.9700140T
Unit Price
お問い合わせ
Reliable, Stable Measurements
Avoid downtime from unreliable ISE data caused by temperature fluctuations. The EZ3005sc stabilises both sample and electrode using a temperature controlled flow cell, eliminating measurement errors and delivering precise, repeatable chloride results operators can trust.
Lower Maintenance Effort
Minimise downtime and service costs with the EZ3005sc. Automated 2 point calibration, reagent alerts, a rugged ISE electrode, and minimal moving parts extend maintenance intervals; so operators spend less time servicing instruments and more time on plant operations.
Reduced Operating Cost
The EZ3005sc helps optimise operating costs by reducing chemical consumption and service visits. Multi stream capability monitors up to eight sample lines, lowering cost per sampling point and extending equipment life.
Designed for easy integration into existing control systems
With a wide range of analogue and digital outputs, this analyser aligns with plant specific requirements, ensuring compatibility with existing infrastructure and immediate access to real time measurement data.
仕様
Automatic cleaning:
Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Demineralised water:
Does not apply
Digital outputs:
Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
RS485 communication: Profibus DP or Modbus RTU
Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
RS485 communication: Profibus DP or Modbus RTU
Drain:
Atmospheric pressure, vented, min. Ø 32 mm
Earth connection:
Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Instrument air:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Measurement method:
Discontinuous, direct measurement by combined Ion-Selective Electrode
Number of sample streams:
Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Optional accessory for 2, 4, or 8 sample streams
Reagent requirements:
Keep between 10 - 30 °C (50 - 86 °F)
Sample Quality:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Validation:
Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
アナログ出力:
Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
サンプル圧力:
By external overflow vessel (open to atmospheric pressure)
サンプル温度:
10 - 30 °C (50 - 86 °F)
サンプル流量:
100 - 300 mL/min
検出下限（LOD）:
2 - 100 mg/L Cl-: 2 mg/L
5 - 250 mg/L Cl-: 5 mg/L
10 - 500 mg/L Cl-: 10 mg/L
20 - 1000 mg/L Cl-: : 20 mg/L
5 - 250 mg/L Cl-: 5 mg/L
10 - 500 mg/L Cl-: 10 mg/L
20 - 1000 mg/L Cl-: : 20 mg/L
原材料:
Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
Wall section: Galvanised steel, powder coated
校正:
Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
質量:
Max. 35 kg (77 lb)
周囲温度:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
寸法:
688 mm x 460 mm x 340 mm
精度:
Better than 2% full scale range for standard test solutions
測定項目:
Chloride
測定周期:
Default: 5 minutes
Continuous: 5 minutes
Continuous: 5 minutes
測定範囲:
2 - 100 mg/L Cl-
5 - 250 mg/L Cl-
10 - 500 mg/L Cl-
20 - 1000 mg/L Cl-
5 - 250 mg/L Cl-
10 - 500 mg/L Cl-
20 - 1000 mg/L Cl-
測定方法:
Ion-Selective Electrode
電源:
100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Max. power consumption: 120 VA
認証:
CE, ETL certified to UL and CSA safety standards, UKCA
保護クラス:
IP44
保証:
12 ヶ月
妨害物質:
Bromide [(Br)-], sulphide [(S)²-], iodide [(I)-], cyanide [(CN)-] ions may interfere. Mercury [(Hg)+] must be absent. Ammonia [NH₃] and thiosulphate [(S₂O₃)²-] may interfere. Fats, oil, proteins, surfactants and tar.