EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA
Product #:
EZ3008.9700140T
Unit Price
お問い合わせ
Stable Performance in Changing Conditions
The EZ3008sc delivers temperature controlled, discontinuous fluoride measurements with multi stream capability. Operators get stable, reliable data during process fluctuations, reducing manual checks and adjustments while maintaining confident day to day water quality control.
Reduced Maintenance and Service Costs
Designed for long-term operation, the analyser uses gel-filled ion-selective electrodes that eliminate the need for electrolyte refilling. This technology reduces reagent consumption, routine service interventions, maximises analyser uptime, and lowers the total cost of ownership over the instrument’s lifetime.
Flexible Connectivity for Legacy and Modern Platforms
Integrate seamlessly into existing PLC, SCADA, DCS and plant network architectures with a built-in industrial panel PC. Real-time data transmission provides immediate visibility into diagnostics and status, enabling faster responses and improved decision-making across your facility.
Flexible Analysis for Multiple Streams
Conduct quick spot checks and investigations without interrupting routine monitoring using built-in grab sampling. When combined with the optional 8-channel sample stream, one analyser sequentially measures multiple process points: maximising asset utilization and coverage while simplifying your system architecture.
What's in the box?
EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Fluoride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)
仕様
Automatic cleaning:
Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Demineralised water:
Does not apply
Digital outputs:
Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
RS485 communication: Profibus DP or Modbus RTU
Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
RS485 communication: Profibus DP or Modbus RTU
Drain:
Atmospheric pressure, vented, min. Ø 32 mm
Earth connection:
Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Instrument air:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Measurement method:
Discontinuous, direct measurement by combined Ion-Selective Electrode
Number of sample streams:
Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Optional accessory for 2, 4, or 8 sample streams
Reagent requirements:
Keep between 10 - 30 °C (50 - 86 °F)
Sample Quality:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Validation:
Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
アナログ出力:
Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8
サンプル圧力:
By external overflow vessel (open to atmospheric pressure)
サンプル温度:
10 - 30 °C (50 - 86 °F)
サンプル流量:
100 - 300 mL/min
検出下限（LOD）:
0.05 - 2.5 mg/L F-: 0.05 mg/L
0.1 - 5 mg/L F-: 0.1 mg/L
0.2 - 10 mg/L F-: 0.2 mg/L
0.1 - 5 mg/L F-: 0.1 mg/L
0.2 - 10 mg/L F-: 0.2 mg/L
原材料:
Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
Wall section: Galvanised steel, powder coated
校正:
Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
質量:
Max. 35 kg (77 lb)
周囲温度:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
寸法:
688 mm x 460 mm x 340 mm
精度:
Better than 2% full scale range for standard test solutions
製品に含まれるもの::
EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Fluoride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)
測定項目:
Fluoride
測定周期:
Default: 5 minutes
Continuous: 5 minutes
Continuous: 5 minutes
測定範囲:
0.05 - 2.5 mg/L F-
0.1 - 5 mg/L F-
0.2 - 10 mg/L F-
0.1 - 5 mg/L F-
0.2 - 10 mg/L F-
測定方法:
Ion-Selective Electrode
電源:
100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Max. power consumption: 120 VA
認証:
CE, ETL certified to UL and CSA safety standards, UKCA
保護クラス:
IP44
保証:
12 ヶ月
妨害物質:
Metal ions like aluminium [(Al)³+] > 72 mg/L, calcium [(Ca)²+] > 108 mg/L and iron [(Fe)²+/(Fe)³+] > 150 mg/L. Fats, oil, proteins, surfactants and tar.